What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
The author is making several great pointers regarding Hot Water Heater Repair as a whole in the content directly below.
Several modern houses take advantage of an electric hot water heater for their heating system, because of its ease and simplicity of use. Nonetheless, just like any other electrical home appliances, troubles may develop with its use, unexpectedly. It can be truly irritating to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm adequate or even as well warm. Whatever the case may be, hot water heater troubles can be quite stressful. Luckily, we have actually made a list of possible options to your hot water heater issues. There are a number of aspects that can cause a lot of these issues, maybe a concern with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for safety. Whatever the issue is, getting it taken care of ought to not posture too much of a problem if you adhere to these steps:
Inspect Your Power Supply:
As standard as this may appear, it is very required. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply transform it off and on once again. Change any kind of broken or damaged fuse. Examine the appliance with power after these modifications to see if it's now functioning.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try having a look at your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is faulty, replace that component and afterwards inspect whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature level reset over the thermostat. This need to aid warm the water. Transform the breaker back on and also check if the issue has been solved.
Call A Professional:
If after changing all defective components as well as resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert point of view. The trouble with your heating system could be that the cold and hot taps have been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the instance might be, an expert plumber would help address the trouble.
Final thought
Water heater problems are not constantly significant. A number of them are due to small concerns like a blown fuse or worn-out heating element. Changing the faulty components need to do the trick. Nevertheless, if you are still incapable to resolve the issue, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our excerpt about No Hot Water — Water Heater Repair. Thank you for finding the time to read our piece. Sharing is caring. Helping people is fun. Thanks a bunch for your time. Visit again soon.
Rates
Report this page